With simple structure and conveniently regulated discharge mouth, it is more suitable for crushing most ores and ores with much clay.
1. Deep cavity design, large size reduction ratio, high crushing efficiency and fine granularity.
2. Improve the speed of eccentric shaft, high production capacity.
Main Technical Parameters
Feed Inlet Size(mm) | Maximum Charging Size(mm) | Yield(t/h) | Spindle Speed(r/min) |
Discharge Hole Adjustment Range(mm) | Overall Dimensions (mm) |
Length | Width | | | | | Power(km) |
250 | 150 | 125 | 1-3 | 285 | 10-40 | 5.5 |
400 | 250 | 200 | 5-20 | 300 | 20-80 | 15 |
750 | 150 | 120 | 8-35 | 320 | 10-40 | 15 |
600 | 400 | 350 | 14-36 | 250 | 40-100 | 30 |
750 | 250 | 210 | 15-45 | 300 | 15-50 | 30 |
1000 | 250 | 210 | 15-50 | 330 | 20-50 | 30 |
1200 | 250 | 210 | 20-70 | 320 | 20-60 | 45 |
750 | 500 | 400 | 30-80 | 250 | 50-120 | 55 |
900 | 600 | 480 | 56-192 | 250 | 75-200 | 75 |
1200 | 900 | 650 | 180-350 | 180 | 100-250 | 110 |
1300 | 300 | 250 | 20-90 | 330 | 20-80 | 55 |
1060 | 750 | 360 | 110-242 | 250 | 80-140 | 90 |